|
Product Data Sheets
Tekaloid T318 - formally BG18
Single Pack Alkyd Coach Enamel
Product features
This product is a superior coach enamel with excellent flow characteristics and is particularly suitable for brush application but can be sprayed. It has excellent gloss and colour stability, a superb appearance and durability.
* Excellent flow
* High gloss
* Outstanding colour stability
* Tough and flexible
* Full range of colours available
General product information
Shelf life (months): 24
Storage temperature: Minimum 5°C Maximum 35°C, Minimum 40°F Maximum 94°F
Pack size: 1, 2.5 litres
Colour: Full colour range to order
Appearance when dry: Full gloss 95% (on a 60° head)
Curing: Air drying
Pot life (at 20°C, 68°F): N/A
Product specification
Volume solids: 47 ± 2%
VOC (g/l) 400 (varies with colour)
Weight per litre: 0.92 - 1.15 kg
Dry film thickness: 30-50 (microns)
VOC = Volatile Organic Compound
Surface preparation
All surfaces should be clean, dry and free from all contaminants.
Normally applied over primer or undercoat.
Application
Mixing: Ensure product is stirred thoroughly before use.
Application methods:
Brush: ready for use.
Conventional spray (cold): Thin 10-15% with TN07.
Hot spray maximum: 70° Celcius, 158° Fahrenheit, Add thinner TN07 as required.
Thinning solvent: TN07
Curing/drying:
Touch dry: 4 hours 2 hours 1 hours
Hard dry: 12 hours 6 hours 3 hours
Overcoat time: 16 hours 16 hours 16 hours
Note: All information relates to typical dry film thickness.
Overcoating information: As above.
Tekaloid BC19
High sheen undercoat
Recommended use:
High opacity brush or spray applied undercoat for use with Tekaloid SE and other single pack coach enamels
Product features
* Excellent adhesion* High opacity
* Air drying
* Very flexible, smooth undercoat enhancing high quality coach finishes
General product information
Shelf life (months): 24
Storage temperature: Minimum 5°C Maximum 35°C, Minimum 40°F Maximum 94°F
Pack size: 1 and 5 litres
Colour: Dispensed
Appearance when dry: High sheen
Curing: Air drying
Pot life (at 20°C, 68°F): N/A
Product specification
Volume solids: 47 ± 2%
VOC (g/l) 420 (as supplied - varies with colour)
Weight per litre: 1.2 - 0.05 kg
Dry film thickness: 30 - 45 (microns)
Wet film thickness: 64 - 96 (microns)
Surface preparation
All surfaces should be clean, dry and free from all contaminants.
Designed for use on commercial, public service vehicles after suitable preparation and priming.
May also be applied to aged finishes if they are in sound condition and suitably prepared.
Application
Mixing: Ensure product is stirred thoroughly before use.
Application methods:
Brush: ready for use (thin with TN07 if required)
Conventional spray - Thin 10% (35 secs BSB4) TN07.
Hot spray - ready for use (maximum 70° Celsius, 158° Fahrenheit)
Thinning solvent: TN07
Curing/drying:
Temperature 10°C 20°C 30°C
Touch dry: 4 hours 2 hours 1 hours
Hard dry: 8 hours 4 hours 2 hours
Overcoat time: 8 hours 4 hours 4 hours
Note: All information relates to typical dry film thickness.
Tekaloid elastic oil primer BC14
Slight sheen, long oil alkyd multi surface primer
Features and uses:
This product is formulated using a traditional long oil alkyd resin which has excellent adhesion properties along with the flexibility required when used on a range of different surfaces. It is designed for use on new steel, GRP, factory applied finishes and timber after suitable preparation.
Product information
Resin type: Long oil alkyd
Appearance when dry: Slight sheen
Colour availability: Grey
Volume solids (nominal): 39.0 ± 2%
Dry film thickness: 25 (microns)
Theoretical spreading rate: 15.6 m²/litre
VOC gms/litre as supplied: 390 (less water)
Shelf life: Best before 24 months
Storage conditions: Above 5°C, below 35°C, 40°F - 94°F
Weight per litre: 1.37kg
Pack size: 1, 2.5 and 5 litres
Flash point: Above 32°C, 87°F
Curing: Air drying
Surface preparation
All surfaces should be clean, dry and free from all contaminants.
Application details
Mixing: Ensure product is stirred thoroughly before use.
Conventional spray: 30 secs ± 5 Ford F4 cup (thinner TN02)
Curing/drying:
Touch dry: 4 hours 2 hours 1 hours
Hard dry: 12 hours 8 hours 4 hours
Overcoat time: 24 hours 16 hours 16 hours
Additional information: Aluminium and Zinc coated steel should be primed with Tekaloid etch CA42 or CA75.
Tekaloid oil filler grey BC15 K93
Modified alkyd and selected pigment
Features and uses:
This product is a brushing filler for small imperfections. It is based on a fast drying, modified alkyd with good sanding and filling properties. It is designed to be applied either in a single of multiple coat. It can be sanded down and re-coated after 4 hours. It is designed to be top coated with a wide range of single component finishes and undercoats but is specifically designed for the Tekaloid range of coach finishes.
Product information
Resin type: Modified alkyd selected pigment
Appearance when dry: Matt
Colour availability: Grey
Volume solids (nominal): 41 ± 2%
Dry film thickness: 50 (microns)
Theoretical spreading rate: 8.2 m²/litre
VOC gms/litre as supplied: 507
Shelf life: Best before 12 months
Storage conditions: Above 5°C, below 35°C, 40°F - 94°F
Weight per litre: 1.49kg
Pack size: 1 and 5 litres
Flash point: Above 32°C, 87°F
Curing: Air drying
Surface preparation
All surfaces should be clean, dry and free from all contaminants.
Application details
Mixing: Ensure product is stirred thoroughly before use.
Curing/drying:
Touch dry: 1 hour 30 minutes 15 minutes
Hard dry: 4 hours 2 hours 1 hour
Overcoat time: 8 hours 4 hours 2 hours
Additional information: Apply in successive layers either wet-on-wet to a maximum of 80 microns, dry film, or allow to harden and re-coat as required with other coats if necessary.
Tekaloid Red Oxide BA74 R01
Medium oil alkyd
Usage:
Protective primer for use on bare metal, Cast iron and steel.
Aluminium requires etch priming prior to application.
Application
Brush, roller, Conventional spray airless equipment.
Drying time: Touch dry 1 hour at 18°C, 63°F
Re-coat in 2 hours.
Appearance
Slight sheen red oxideDry film thickness: Approx 25 microns per coat
Thinner: Standard TN07 Fast TN02
Tekaloid brilliant aluminium BL15
Modified Alkyd resin and aluminium metal
Features and uses
This product is based on high quality resin and finely dispersed aluminium metal flakes.It exhibits a high degree of reflectance and metallic lustre. It is designed for use on interior and exterior situations which require a long lasting aluminium finish
Application
Brush, roller, Conventional spray airless equipment.
Drying time: Touch dry 1 hour at 18°C, 63°F
Re-coat in 2 hours.
Appearance
Slight sheen red oxideDry film thickness: Approx 25 microns per coat
Thinner: Standard TN07 Fast TN02
Tekaloid Varnish BG 18 000
Extra pale body varnish
Features and uses:
This product is a superior coach varnish with excellent flow characteristics and is particularly suitable for brush application but can be sprayed. It has excellent gloss and colour stability, a superb appearance and durability. It is designed as a finishing varnish for Tekaloid SE gloss.
Product information
Resin Type: long oil alkyd resin
Appearance: Full gloss 95% @ 60° angle
Colour availability: clear
Volume solids (nominal) 45 ± 3%
Dry film thickness (nominal) 30 microns
Theoretical spreading rate 15.0 m²/litre
VOC gms/litre as supplied (unthinned) 435 (average)
Package information
Weight per litre 0.9 ± 3%Pack size 1L and 5L
Flash point above 32°C
Shelf life best before 24 months
Storage conditions above 5°C, below 35°C
Surface preparation
All surfaces should be clean and dry and free of all contaminants. Use Tekaloid undercoat or Tekaloid primer/undercoat as appropriate.Application details
Brush ready for use under normal conditions (thinner TNO7)Air spray (cold) 10-15% (thinner TNO3) to 35-40 secs Ford 4 cup or 35-40 secs BS B4 cup.
Hot spray 70°C thinner TNO7 if required (avoid overheating)
Drying
Touch dry: 4 hours 2 hours 1 hoursHard dry: 12 hours 6 hours 3 hours
Overcoat time: 16 hours 16 hours 16 hours
Additional information
Super pale body varnish BG 18 001 is also available in 1L only.